15
Adjust the alignment of the sawblade to the
table mitre T slot by moving the cast iron table
over the base.
Measure the distance between the blade and
the table T slot at both the front and rear of the
blade.
When both measurements are the same, ensure
that the blade is running free and will clear the
table insert when the blade is tilted to 45
degrees.
When you are satisfied the blade is aligned,
tighten the six bolts and replace the side panel
prior to use.
Adjusting The Blade Angle Stops
Locate the adjustable bolt fitted to the slot in the
saw trunnion. This can be accessed through the
tilt locking handle slot on the front of the
machine.
Loosen the bolt, using a 6mm Allen key, and tilt
the blade accurately to 45 degrees. Retighten
the bolt ensuring that it is positioned as far to the
right as possible.
There is a similar Limit Stop for the 90 degree
setting which is accessed through a hole at the
rear of the machine.
