Charnwood PT250, Руководство пользователя

Страница: 11 / 16

Knife Removal and Replacement
Disconnect from the power supply before starting any maintenance.
Out-feed table
Cutter block
Locking bar bolts
Knife
Locking bar
In-feed table
Using the 4mm allen key provided
undo the 5 locking bolts (turn
anticlockwise)
Lift out the locking bar and knife.
Place the new knife into the cutter
block.
Make sure the slot in the knife sits
onto the knife height setting screw.
Once the new knife is in place, refit
the locking bar.
Leave the bolts loose so the knife
can still move.