BRTRO-420 Drawer Type Reflow Oven Operating Manual
- 6 -
Edit page is used to select and edit curves.
EDIT
Cur1
PreHt
50.3°C
100°C
48s
Save
S1.0
Item
Type
Description
EDIT
Display
Indicates that the current screen is edit page
50.3°C
Display
Current temperature
Cur1
Parameter
Select the curve, different curve contain a set of completely
independent parameters
PreHt
Parameter
Select section of the curve, for example, the current selection is the
preheating section of curve, the three parameters below will change
with different value of this parameter
100°C
Parameter
Target temperature of preheating section
48s
Parameter
Length of preheating section
S1.0
Display
Temperature change rate of preheating section, 1.0 said that the
temperature increased by 1°C per second
Save
Function
There has an ‘*’if there are parameters are modified but not saved,
select to save the modified parameters and the ‘*’ will disappear at
the same time; Note, even if the parameters are not saved, the
machine will run with new parameters until the power is off
Curve
Display
The shape of current curve, it changes with the change of the
parameters of curve
From above, it is obvious that the parameters in section will change along with the selection
of different sections. All of these changes are listed below. The values of the parameters in the
table are just examples.
Section
Name
Parameter
Type
Description
PreHt
Preheat
100°C
Parameter
Target temperature of preheating. The start
temperature of preheating is the target temperature of
cooling, taking the parameters in the table as example,
temperature will be changed from 50°C to 100°C in
preheating section
48s
Parameter
Time of preheating section
S1.0
Display
Temperature change rate of preheating section
Heat
Heat
150°C
Parameter
Target temperature of heating, The start temperature
of heating is the target temperature of preheating,
taking the parameters in the table as example,
temperature will be changed from 100°C to 150°C in
