Contact 1.800.762.1142 for assistance.
Do not return to place of purchase.
Owner’s manual: model 200605C outdoor patio heater
3
Step 13 – Replace Engine Access Panel
• Slide Igniter wire onto Igniter post .
• Slide tab at top of Access Panel into slot in Emitter bottom .
• Rotate Panel down until holes line up at bottom .
• Secure Access Panel in place with thumbscrew .
• Replace Control Knob .
Step 14 – Install Igniter Battery
Note:
This step is required only for models with electronic ignition .
• Remove battery cover cap by turning cap counterclockwise .
• Install () AA battery . Negative end of battery goes in first .
• Replace battery cover cap by turning cap clockwise .
Note:
Once you have successfully completed assembly steps -4 you
are ready to begin operating your heater .