Contact 1.800.762.1142 for assistance.
Do not return to place of purchase.
Owner’s manual: model 200605C outdoor patio heater
9
Step 6 – Attach Engine/Post to Platform
Insert end of Post without holes over Gas Line, being careful not to bend
Gas Line .
Slide Post into collar of Platform so Post rests completely on Platform .
Tighten bottom three setscrews with hex (Allen) wrench supplied .
Make sure Post is perpendicular to Base .
Use top three setscrews to adjust Post’s angle as necessary .
Tighten all six setscrews .
Note
: Post must be perpendicular to Base . Failure to do so will
adversely affect burner performance .
Step 7 – Connect Gas Line to Engine
Attach Gas Line to Control Valve:
Pull collar of Gas Line back .
Insert Gas Line over Control Valve .
Release collar and it should lock in place . (Tip – push Gas Line up from
bottom of Post to make a good seating before releasing the collar .)
Gently tug on line to test for proper connection . If Gas Line moves
it is not properly connected . Do not proceed until you have a proper
connection .
Fully tighten the (4) screws from Step 5 .