14
6b. REMOTE CONTROLS
NOTE: This is thermostatic remote control. The remote should be in the same
room as fireplace and placed on a flat surface. It must be placed away from the
fire so the hot air will not blow on it and affect thermostatic reading.
The communication frequency between the fire and remote has already been set
up. If you cannot use the remote with the fire, please follow instructions
Step.6b37 to initiate this connection in point.
Standby for Remote Handset
6b.1 The screen shown to the right is when the
remote handset is in standby condition.
Turn on/off
6b.2 Press
to turn on the flame effect, turn off
flame effect and heater when in normal
mode.
6b.3 Press
to turn on/off the flame effect
under daily and weekly timer mode.
After Day/Time set up
Before Day/Time set up
