Charles WIC-101010SXAN1, Общее описание и установка

Страница: 1 / 16

LT-WIC101010
3
rd
Printing, July 15, 2020
©Copyright 2020 Charles Industries LLC. All Rights reserved. Printed in the United States of America.
Availability of features and technical specifications herein are subject to change without notice.
Charles is a registered trademark of Charles Industries.
Page 1 of 16
Charles Universal Broadband Enclosure
WIC-101010SXAN1
General Description and Installation
1. GENERAL INTRODUCTION ...................................................... 1
1.1. Document Purpose ................................................................... 1
1.2. Product Purpose ....................................................................... 1
1.3. Product Mounting and Location ............................................... 1
2. PRODUCT DESCRIPTION ........................................................... 2
3. INSTALLATION ............................................................................ 6
3.1. Inspecting the Product .............................................................. 6
3.2. Following and Using Safety Precautions.................................. 6
3.3. Obtaining Tools and Equipment ............................................... 6
3.4. Preparing the Installation Site .................................................. 6
3.5. Lifting the WIC ......................................................................... 7
3.6. Mounting the WIC .................................................................... 7
3.7. WIC Wiring and Equipment.................................................... 10
3.8. Conduit Seals.......................................................................... 13
3.9. Verifying the Installation ........................................................ 13
4. PERIODIC MAINTENANCE ...................................................... 13
5. TECHNICAL ASSISTANCE AND REPAIR SERVICE ........... 13
6. WARRANTY & CUSTOMER SERVICE ................................... 13
7. SPECIFICATIONS ....................................................................... 13
7.1. Regulatory Specifications ....................................................... 13
7.2. Product Specifications ............................................................ 14
7.3. Part Numbers ......................................................................... 14
7.4. Alarm Connections ................................................................. 15
1. GENERAL INTRODUCTION
1.1. Document Purpose
This document provides general information for the WIC-101010SXAN1 walk-in cabinet. Figure 1 shows a closed front view of the
enclosure.
-NOTE-
Hereafter, the Charles Walk-in Cabinet WIC-101010SXAN1 will be referred to as the “WIC.”
1.2. Product Purpose
The WIC consists of a protective walk-in enclosure for an integrated system of electronic components and equipment that can serve fiber
and copper interfaces. Note: this enclosure is not intended for use as a dwelling and is not suitable for human or animal habitation.
1.3. Product Mounting and Location
This enclosure is suitable for outside plant-type (OSP) locations and those that may require NEC compliance. The outdoor, weather-
resistant WIC is to be mounted on a concrete pad. The installer connects the power, fiber and copper connections. Detailed mounting and
installation information is covered in Section 3.
Figure 1 Front View of the WIC