LT93–PS1230–1
3
Charles Industries, Ltd. All rights reserved. Printed in the United States of America.
INTRODUCING... C-POWER
Thank you for purchasing the C-POWER
Marine Electronic Power Supply.
This manual covers the following models, listed by model number:
Table 1. 12 VDC & 24 VDC 15- & 30-Amp C-Power Model Numbers
Model Number
Input Voltage
Frequency
Output Voltage
93–PS2415
120VAC*
60 Hz*
25.5 VDC
9C–PS2415
220VAC**
50/60 Hz**
25.5 VDC
93–PS2430
120VAC*
60 Hz*
25.5 VDC
9C–PS2430
220VAC**
50/60 Hz**
25.5 VDC
93–PS1230
120VAC*
60 Hz*
13.65 VDC
9C–PS1230
220VAC**
50/60 Hz**
13.65 VDC
* Will accept variances in input voltage from 90 to 135 VAC and variances in frequency from 45 to 65 Hz with no degradation of output.
** Will accept variances in input voltage from 180 to 270 VAC and variances in frequency from 45 to 65 Hz with no degradation of output.
Warranty/Registration
Before proceeding, complete and mail back the Warranty Registration card.
Manual Purpose
With your personal safety in mind, this manual lists important safety precautions first, then covers installation,
operation, maintenance, troubleshooting and warranty and customer service information.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
. This manual contains important safety and operating instructions
for the C-Power. Read the entire manual before usage.
Environmental Precaution
Do not expose the C-Power to rain, snow, or excessive moisture.
C-Power Application Precaution
These units are intended for hard-wired applications. Use of attachments not recommended or sold by Charles
Marine Products may result in risk of fire, electrical shock or personal injury.
Damaged C-Power Precaution
Do not operate the C-Power if it has received a sharp blow, been dropped, or otherwise damaged. See the sec-
tion in this manual on
Warranty & Customer Service.
Disassembly Precaution
Do not disassemble the C-Power. See the sections in this manual on
Maintaining the C-Power, Troubleshooting
the C-Power and Warranty & Customer Service.
Maintenance/Cleaning Precaution
To reduce risk of electrical shock, disconnect the C-Power from AC power and load before attempting any mainte-
nance or cleaning.
Grounding Precautions
When the C-Power is permanently mounted inside the boat, it must have a grounding conductor.
