16
English
3. Connect the terminal block to the bottom of the Charge Amps
Amp Guard.
5.4 Mount and connect the power
supply
The power supply provides 12V to the Charge Amps Amp Guard.
The power supply is pre-configured to 12V. If needed, voltage can
be adjusted using the adjustment screw on the front of the power
supply.
1. Connect the power supply to the mains (L, N) according to the
labels on the power supply, i.e. N to AC(N) (left side) and L1 to
AC(L) (right side).
2. Insert the supplied 12V power cable into the power supply
according to the label on the power supply, i.e. marked cable to
+Vo (left side) and black cable to -Vo (right side).
3. Mount the power supply onto the DIN-rail.
4. Connect the 12V power cable to the sensor cartridge.
