5
1. Remove the exterior and interior packaging. Check that ice scoop is included. If any parts
are missing, please contact our customer service.
2. Clean the interior with lukewarm water and a soft cloth. Take out the ice basket and clean
it .
3. Find a location for your ice maker that is protected from direct sunlight and other sources of
heat (i.e.: stove, furnace, radiator). Place the ice maker on a level surface. Maker sure that
there is at least 4 inches of space between the back and sides of your ice maker and the
wall.
4. Allow one hour for the refrigerant fluid to settle before plugging ice maker in.
5. The appliance must be positioned so that the plug is accessible.
6. Before placing water bottle on the unit, be sure that the drain plug on the back is tightly
fastened.
7. Hold the water bottle vertically and upside down (over the unit) and place the water bottle
into the SMART CORE for the water bottle. Apply slightly pressure in order to pierce the
bottle cap with the spigot. This unit accepts two, three or five gallon water bottle with
pierceable sealed caps.
PLACE BOTTLE
VERTICALLY
STRAIGHT DOWN
OPERATING PROCEDURES & MAINTENANCE
UNPACKING YOUR ICE MAKER
