8
Sideburner
Valve
s
Never remove opening
at end of valve.
HeatWave Hose
(if featured)
5. If “growing”
If leaks cannot be stopped “do not
try to repair”
6.
bubbles appear, there is a leak.
Close LP tank valve immediately and re-tighten
connections.
call for replacement parts. Order
new parts by giving the serial number, model
number and name of items needed to the Grill
Service Center at 1-800-241-7548.
Always close LP tank valve after performing leak
test by turning hand wheel clockwise.
Leak Testing Valves, Hose and Regulator
1. Turn all grill control knob(s) to OFF.
2.
3.
Correct before
proceeding
4.
Be sure regulator is tightly connected to LP tank.
Completely open LP tank valve by turning hand
wheel counterclockwise. If you hear a
, turn gas off immediately. There is a major
leak at the connection.
.
Brush soapy solution onto areas where bubbles are
shown
rushing
sound
:
Sideburner Hose
(if featured)
• If the regulator frosts turn off grill and LP tank
valve immediately. This indicates a problem
with the tank and it should not be used on
any product. Return to supplier!
WARNING
Valve Check
Hose Check
Turning Grill Off
Ignitor Check
• Important: Make sure gas is OFF at LP tank
before checking valves
LOW
•
• Turn gas off at LP tank.
. Knobs lock in
position. To check valves, first push in knobs and
release, knobs should spring back. If knobs do not
spring back, replace valve assembly before using
grill. Turn knobs to
position then turn back to
position. Valves should turn smoothly.
Before each use, check to see if hoses are cut,
worn or kinked. Replace damaged hoses before
using grill. Use only valve/hose/regulator specified
by manufacturer.
• Turn all knobs to
position. Turn LP tank OFF
by turning hand-wheel clockwise to a full stop.
Press ignitor button or
turn ignitor knob rapidly. "Click" should be heard
and spark seen each time between collector box or
burner and electrode. See
if no
click or spark.
"Troubleshooting"
OFF
OFF
OFF
Normal
Hose
Kinked
Hose
