Assembly
Step 1
Slide tool hooks onto one of the towel bars prior to assembly.
Attach each towel bar using two
1/4-20x3/4” machine screws
.
DO NOT LIFT UNIT USING TOWEL BARS.
1/4-20x3/4”
Machine Screw
Qty: 4
Wrap/Body
Towel bar
Tool hook
1/4-20x3/4”
Machine Screw
Step 2
Feed burner tube through center hole of heat shield. Align the three threaded studs on bottom of burner
with small holes in heat shield. Make sure electrode passes through electrode hole. Secure burner
beneath heat shield using three
#10-24 hex/keps nuts
. Attach ignitor wire to electrode.
#10-24
Hex/Keps Nut
Qty: 3
Burner assembly
Ignitor Wire
Electrode
#10-24 Hex/Keps Nut
a Vi w
Re r
e
12
