2
Attach side panels to bottom shelf using three
1/4-20x1/2” screws, 7mm lock washers per panel.
IMPORTANT: Panel with hole must
be on left side of bottom shelf.
Left side panel
(with hole)
Make sure side panels
are pushed as far to the
rear of bottom shelf as
possible before fully
tightening screws.
Right side panel
ASSEMBLY
1/4-20x1/2” screw
7mm lock washer
1
5
Locking caster
Bottom shelf
Fixed caster
Rear
Front
1
Place bottom shelf upside down. Insert Bent U Pin into the caster mounting plate to lock it in place, shown A.
Spin the caster clockwise into the threads on the bottom shelf until secure. Remove the Bent U Pin and repeat for remaining
casters. Make sure the two locking casters are secured at the rear and the non-locking casters are secured at the front.
After all 4 casters are secure remove the Bent U Pin and save for future maintenance.
Bent U pin
A
Содержание 463269211
Страница 30: ...NOTES 30 ...
Страница 31: ...Warranty Registration Department P O Box 1240 Columbus GA 31902 1240 31 ...
Страница 32: ......