Grill Halogen Light
LIGHT OPERATION INSTRUCTIONS
Bulb Replacement
1. Make sure light switch on the control panel is in the “OFF” position.
2. Connect light plug to an extension cord, then put the extension
cord plug into the outlet on the wall.
3. Turn the light switch to “ON”.
ON
OFF
WARNING
Keep any electrical supply cord away from any
heated surface.
Use the shortest length extension cord required.
Do not connect 2 or more extension cords together.
Make sure light switch on the control panel is in the “OFF” position and adapter plug is disconnected from outlet.
▲
Release the screw securing the light
socket.
Take out the socket and remove the lens.
Pull out the bulb and replace
with a new bulb.
Step 1
Step 2
Step 3
Step 4
Reverse instructions from step 2
through step 1 to re-install socket.
Bulb Specification
Bulb Type: Halogen
Wattage: 10 W per bulb
Voltage: 12 V
ON
OFF
1.
2.
3.
Take care not to touch the bulb with your bare fingers.
Touching bulb with your skin can leave a film on the
bulb that causes it to burn out quickly.
CAUTION
˙
˙
Continued on next page
Light plug
Extension cord,
for out door use
10
Содержание 463269211
Страница 30: ...NOTES 30 ...
Страница 31: ...Warranty Registration Department P O Box 1240 Columbus GA 31902 1240 31 ...
Страница 32: ......