background image

7

Safety Tips

Before opening LP cylinder valve, check the coupling nut for 

tightness.

When grill is not in use, turn off all control knobs and LP 

cylinder valve. 

Never move grill while in operation or still hot.

Use long-handled barbecue utensils and oven mitts to avoid 

burns and splatters.

Maximum load for sideburner and side shelf is 10 lbs.

The grease tray must be inserted into grill and emptied after 

each use. Do not remove grease tray until grill has 

completely cooled.

 

Clean grill often, preferably after each cookout. If a bristle

brush is used to clean any of the grill cooking surfaces,

ensure no loose bristles remain on cooking surfaces prior to

grilling. It is not recommended to clean cooking surfaces

while grill is hot.

If you notice grease or other hot material dripping from grill 

onto valve, hose or regulator, turn off gas supply at once. 

Determine the cause, correct it, then clean and inspect valve, 

hose and regulator before continuing. Perform a leak test.

Keep ventilation openings in cylinder enclosure (grill cart) free 

and clear of debris.

Do not store objects or materials inside the grill cart 

enclosure that would block the flow of combustion air to the 

underside of either the control panel or the firebox bowl.

The regulator may make a humming or whistling noise during 

operation. This will not affect safety or use of grill.

If you have a grill problem see the "Troubleshooting Section".

If the regulator frosts, turn off grill and LP cylinder valve 

immediately. This indicates a problem with the cylinder and it 

should not be used on any product. Return to supplier!

WARNING

For Safe Use of Your Grill and to Avoid Serious Injury:
• 
Do not let children operate or play near grill. 
• Keep grill area clear and free from materials that burn.
• Do not block holes in sides or back of grill. 
• Check burner flames regularly.
• Use grill only in well-ventilated space. NEVER use in 

enclosed space such as carport, garage, porch, covered 

patio, or under an overhead structure of any kind.

• Do not use charcoal or ceramic briquets in a gas grill. 

(Unless briquets are supplied with your grill.)

• Use grill at least 3 ft. from any wall or surface. 

Maintain 10 ft. clearance to objects that can catch fire or 

sources of ignition such as pilot lights on water heaters, 

live electrical appliances, etc.

• Keeping the ventilation opening(s) of the cylinder 

enclosure free and clear from the debris.

• Apartment Dwellers:

Check with management to learn the requirements and 

fire codes for using an LP gas grill in your apartment 

complex. If allowed, use outside on the ground floor with 

a three (3) foot clearance from walls or rails. Do not use 

on or under balconies.

• NEVER attempt to light burner with lid closed. A 

buildup of non-ignited gas inside a closed grill is 

hazardous.

• Never operate grill with LP cylinder out of correct 

position specified in assembly instructions. 

• Always close LP cylinder valve and remove 

coupling nut before moving LP cylinder from 

specified operation position.

CAUTION

• Putting out grease fires by closing the lid is not possible. 

Grills are well ventilated for safety reasons. 

• Do not use water on a grease fire. Personal injury may 

result. If a grease fire develops, turn knobs and LP 

cylinder off. 

• Do not leave grill unattended while preheating or burning 

off food residue on HI. If grill has not been regularly 

cleaned, a grease fire can occur that may damage the 

product. 

Lighting instructions continued on next page.

Ignitor Lighting

  Do not lean over grill while lighting.

1. Turn       OFF all Gas Burner Control Valves.
2  Turn       

ON gas source or tank

3. Open lid during lighting.
4. 
To ignite any main burner, turn the main burner control knob

5. Push and hold ELECTRONIC IGNITOR button until the burner

lights.

Once burner has ignited, turn knob to desired setting.

6.

If ignition does NOT

Repeat steps 4 through 7 for the remaining main burners.

 occur in 5 seconds, turn the burner control

 to       OFF , wait 5 minutes, and repeat lighting  procedure.

7.

8.

If ignition still does not occur, follow match-lighting 

instructions.

 to

 position.

Содержание 463247109





























Отзывы: