Char-Broil 11201715, Руководство по эксплуатации продукта

Страница: 14 / 16

Page 14
7
Finally, replace all charcoal grates, ash pans, ash pan hangers, and cooking grates. You have succesfully
converted your Model 11301714 Grill into an Offset Smoker!
Next, install the front Connector Tube by inserting a 1/4-20x2" screw from inside the firebox, through one of the
12x33mm Connector Tubes, then into the 11301714 grill leg bracket. Secure with a 1/4-20 flange nut. Repeat for
the rear side. Fully tighten all hardware installed.
8
1/4-20
Flanged Hex Nut
Qty. 2
1/4-20x2”
Hex Head Screw,
Qty. 2
12x33mm
Connector Tube
Qty. 2
NOTE : The tabletop firebox is shown with the legs attached. You may
choose to remove the legs. If you choose to remove the legs, reverse
the procedure found on page 8, step 1. If removing the legs - reinstall
the leg hardware into the leg mounting holes.
NOTE : The tabletop firebox is
shown with the legs attached. You
may choose to remove the legs. If
you choose to remove the legs,
reverse the procedure found on
page 8, step 1. If removing the legs
- reinstall the leg hardware into the
leg mounting holes.