General Operating Instructions
• Be sure gate control is in the closed position before filling hopper
• Determine appropriate setting for material being used by reading the suggested setting on the
material’s bag AND/OR by referencing the application chart on your spreader’s control panel
(Charts provided are only guidelines. Be sure to read the instructions on the bag/box of the
material you’re spreading to identify accurate setting needed)
• Remove wing nut and slide indicator to desired setting. Tighten wing nut completely.
• To begin spreading, start walking (about 3mph pace) release the control lever by pushing it
forward. It will spring forward to the slide stop.
• To stop spreading simply pull the gate control back into the closed position.
Storage and Maintenance
• When finished spreading empty hopper of any remaining material
• Thoroughly wash spreader and allow to dry before storing
CHAPIN INTERNATIONAL, INC. P.O. BOX 549 700 ELLICOTT ST. BATAVIA, NY 14021-0549
CHAPIN CUSTOMER SERVICE:
800-950-4458 www.chapinmfg.com
Due to our ongoing product improvement process, product specifications may change without notice. U.S. and foreign patents pending.
Ref.#
Qty
Part No.
Description
1
1
6-9067
Auger
2
1
6-8280
Baffle Kit
Replacement Parts
1
2
