Chaparral VFS226, Руководство пользователя

Страница: 37 / 108

Configuring the Router
3-7
Table 3-1 lists Ethernet default settings for use in the following menu items. Although this
version of the router has no SNMP traps, gateways are included for future expansion.
SNMP Configuration Screen
Option 3 from the Network Management System Console screen displays the SNMP
Configuration screen.
Table 3-1. Ethernet default settings
Setting Default
IP address 10.0.0.1
IP mask 255.255.255.0
Gateway 0.0.0.0
DHCP Disabled
Telnet
password Null (enter <CR>)
System name Controller fxxxxx where xxxxx is the last 5 digits of
the MAC address
MAC address 00-50-13-fx-xx-xx where x-xx-xx is unique for each
router and can not be changed
FTP logon flash
FTP password flash
SNMP traps Disabled
SNMP trap
host 0.0.0.0
Telnet timeout 0 sec (this setting can be 60 seconds or greater)
Note: Before choosing to enable DHCP, contact the system administrator
and make sure you have support for identifying IP hardware and name
server addresses.