Chaparral 420 PREMIERE, Руководство владельца/оператора

Страница: 71 / 164

4. Replace the drain plug and, if necessary, prime
the filter by removing the lid and filling the filter
with clean fuel.
5. Replace the lid and tighten the lid T-handle only
by hand. Do not overtighten the lid.
Replace the filter element at regular intervals or if a
power loss is detected.
To Replace the Filter:
1. Shut down the engine.
2. Remove the lid.
3. Remove the seal of the old rubber lid and dis-
pose of it.
4. Apply a coating of clean fuel or motor oil to the
seal of the rubber lid supplied with the new
element.
5. Position the new seal on the lid.
6. Remove the filter element by holding the molded
handle and slowly pulling upward with a twisting
motion.
7. Insert the new filter element with a slow down-
ward twisting motion.
8. Fill the filter with clean fuel, and then replace the
lid. Tighten the lid T-handle using only your
hand. Do not overtighten the lid.
9. Start the engine and check for any leaks.
10. Repair any leaks with the engine shut down.
It is recommended that spare filter elements be car-
ried aboard as contaminated fuel can easily plug a
filter.
REFER TO THE ENGINE OPERATOR’S MANUAL
FOR MORE DETAILED INFORMATION.
Fueling Precautions
Improper fueling procedures are the most common
cause of boat fires. Before fueling your boat, check
the entire fuel system for leaks. Check for weaken-
ing, hardening, swelling, or corrosion of fuel system
components. These include the fuel tank, fuel lines
and fittings, fuel filter, and carburetor. Any sign of
leakage or deterioration requires immediate
replacement before further engine operation.
Before and During Fueling Procedures:
• Make sure that a fire extinguisher is readily
available.
• Safely and securely moor your boat to the dock.
• Turn off the engine and all electrical equipment,
including lights, bilge pump, bilge blower, etc.
• At least one knowledgeable person should be
present.
• Unnecessary individuals should get off the boat.
• Close all hatches, windows, doors, and
compartments.
• Extinguish all cigarettes, cigars, pipes, or other
items that may produce a spark or flame.
Inboard tanks should be grounded.
• The filler pipe should be marked DIESEL.
• The fuel nozzle should be in contact with the
filler pipe to prevent static sparks.
• Fill the fuel tank to less than the rated capacity
to allow for fuel expansion.
• Trim the fuel weight to distribute it equally.
6-3