Chaparral 420 PREMIERE, Руководство владельца/оператора

Страница: 62 / 164

To Operate Manually
1. Make sure that the safety lanyard (see
Figure 4.5) is removed from the anchor chain.
2. Insert the emergency handle into the clutch nut.
3. Turn the handle clockwise to retrieve the anchor.
Maintenance
• Periodically check the motor and control box
electrical connections, remove any residue, and
cover the connections with a small coating of
grease.
• You should disassemble the windlass and
remove any residue build-up at least once a year.
• Use the emergency handle to unscrew the clutch
nut by turning the handle counterclockwise.
• Remove the drum, upper cone, chain wheel, and
lower cone.
• Clean with fresh water and remove any residue
build-up.
• Coat contact surfaces with a light film of lubricant.
• Reassemble the unit and tighten the clutch nut
by turning the handle clockwise.
Note: After haul-in, use the fresh water wash
down spigot in the starboard bow locker to hose
down the chain in the locker.
REFER TO THE WINDLASS OPERATOR’S MANU-
AL IN YOUR OWNER’S PACKET FOR DETAILED
OPERATING INSTRUCTIONS.
4-8
WARNING: The power should be off before any
work is performed on the windlass.