Docking the iPod
Using the A0317 with the A0350 & A0127
8
9
The A0350 is compatible with the A0317. Audio from the iPod dock is transmitted
via CAT5 into the A0350 while power is supplied from the A0350 to the iPod
dock.The power supply for the A0350 can be connected directly to the front of the
A0350 or via a pair of 16AWG wires to the power screw terminals on the side.
A0127 or A0129
A0350
Pwr
Mute
Vid 1
Vid 2
Vid 3
Vid 4
Vol
+
Vol
-
T M
B y C H A N N E L V I S I O N
A r i a
Local In
Active
Spkrs
24VDC
IR In
Flush Mount Amplifier
Left
Right
Connect power either from
the front or rear (not both)
Connect output
of A0317 here
A0317
(Rear)
A0350
(Side)
A0317
(Front)
Connect keypad here
Input connection
from a CAT5 audio
system is optional.
Connect power via front panel
jack or rear panel screw
terminals.
IR
Keypad
CAT5
Audio
R
+ -
L
+ -
Gnd
24V
Green/White - Left Channel Audio Ground
Green - Left Channel Audio
Orange/White - Right Channel Audio Ground
Blue - IR Signal
Blue/White - Status
Orange- Right Channel Audio
Brown/White - vDC Ground
Brown - vDC
Top view:
Pin-out
Stripping and Connecting CAT-5 Wire
Blade
Cat5
1.
Place the CAT-5 between the blade and the first notch of the J-110 tool.
CAT-5 cable should be stripped with a proper stripping tool, such as Channel
Vision’s J-110 tool.
Slight
pressure
Rotate
1 turn only
2.
Rotate the tool only once. Multiple turns
will cause you to cut into the inner wires.
3.
Inspect the inner wires for damage.
If any wires are cut start over at step 1.
Check for damage
Carefully place the iPod onto the dock.
