2/4/8 ZONE CONVENTIONAL FIRE ALARM CONTROL PANEL
| 14
SYSTEM SET-UP DATA CHART
Important: This page should be carefully completed by an authorised engineer prior to system hand-over.
THE INFORMATION ABOVE WAS COMPLETED BY (name) _______________________________
OF (company) _________________________________________ ON (date) __________________
(*) NOTES ON COINCIDENCE: The following applies to all pairs of zones which are set up for coincidence.
There must be alarms on both zones (i.e. zone 1 and zone 2) before the alarm sounders and outputs turn
on. If only one of the zones (i.e. zone 1) goes into alarm, the panel indicates the alarm by illuminating the
relevant light on the panel front and sounding its internal sounder, thus prompting the user to investi-
gate. If found to be false, the alarm can be reset or, if found to be a true fi re condition, the sounders can be
manually activated by pressing the
Silence/Resound Sounders button - as detailed on page 8.
