2/4/8 ZONE CONVENTIONAL FIRE ALARM CONTROL PANEL
| 12
Notes about disablements
(a) The option of disabling or enabling zones 3 & 4 and zones 5, 6, 7 & 8 is only available if these zones are fi tted. If they are not
fi tted, the selection process will skip to the next available option.
(b) The option of disabling or enabling output delays is only available if delays have been programmed into the fi re alarm
panel by the installation engineer. If a delay has been programmed into the panel the Output Delays light will be lit when the
panel is in the normal (i.e. non-accessed) state.
Important: Please refer to the ‘Notes on Delays’ (page 12) before proceeding to make any changes to the way the delays func-
tion operates.
Diagram to show the disablement/enablement selection sequence
