5
.
Step 3 – Attach Cylinder Housing to Base
Attach l-shaped brackets to base housing loosely with 4pcs
M8 X M10 large bolts and large flat washers.
Put the Plastic nut & Fastening piece through the post
in order.Put the Tabletop through the post as show.
Step 4 – Attach Post to Cylinder Housing top
Open the door, put post through the hole on the top of
Cylinder Housing.
Attach post to Cylinder Housing using 4pcs small bolts
Step 5 – Tabletop Installation
Through the Fastening piece to the hole on the Tabletop.Hold
the t abletop using a hand and screw the Fastening piece to the
Plastic connecting counter-clockwise using the other one. Fasten the
Fastening piece.Screw the Plastic nut to the Plastic connecting
counter-clockwise. Fasten the Plastic nut.
Adjust the height of the Tabletop. Loose the Plastic nut and adjust
the Tabletop height of you want. Fasten the Plastic nut.
Put the Plastic connecting through the post as show.
Step 6 – Attach Reflector Studs to Screen Cover
.
Insert 3 Reflector Studs
.
Tighten studs securely.
3 Req’d Reflector Studs
Fill Sand
(For models without tabletop, skip to Step 6)
into Flange nuts from inside tank housing.
Attach cylinder to housing to base with 8 small phillips screws
and 8 small nuts. Tighten all hardware from this step.
Optional ground fixtures for surface mounting. Not for use in
Mount optional ground fixtures with 6 pcs small bolts
and flange nuts into holes on base housing.
conjunction with wheels. (Not available with all models)
