FLW-717C Product Manual
Shenzhen City Chang Rui Technology Co., Ltd
4
、
Address splicing unit is set correctly, see the address settings.
Uncontrolled individual
splicing unit
1
、
Check the address of the device settings are correct.
2
、
Individual control of the device was successful.
Single or multiple
devices VGA / DVI
no input
1
、
Check unit board and the signal source end of the interface is a
good contact;
2
、
Replacing a VGA or DVI cable test;
3
、
The device is set in the input status;
4
、
The input signal exceeds the input range of the product;
5
、
When the DVI input, make sure there is caught DDC, and
there is output.
1.9 Performance
Operating temperature：-15℃-65℃
Working humidity：Relative humidity less than 95%
Power consumption：≤300W，Screen type and size of the
voltage：95V AC-250V AC
Composite video format：PAL、NTSC、SECAM
Composite video Peak：1Vp-p
control method：RS-232（RJ45）
VGA input：WUXGA（1920*1080）
DVI input：WUXGA（1920*1080）
Screen resolution support：WUXGA（1920*1080），Dual 10bit
Temperature-controlled fan：Automatic control
