Chandler Engineering
5000 SERIES PUMP MANUAL
[14]
2.2 Installing the Pistons
Due to previous experience with pistons being broken during shipment, the pistons of your 5000 Series
pump cylinders are not installed in their cylinders for shipment. The pistons are packed separately and
must be installed before the pump cylinders can pump fluid.
This section describes how to install the pistons into the pump cylinders. A more detailed description
of this procedure is included in Chapter 11. The piston, which is made of zirconia ceramic, is extremely
corrosion and scratch resistant.
Q5000 Ambient Temperature Pump Cylinder
Required Tools:
Face spanner wrench and 27 mm socket extension tool. Refer to Section 11.1 for a
description of these tools.
1.
Remove the cylinder barrel retaining ring using the face spanner wrench supplied in
the tool kit.
2.
Unscrew the retaining ring, remove it, and pull the cylinder barrel straight out.
3.
Unpack the piston, wipe it clean and place it into the 27 mm socket extension tool.
4.
Install the piston into the end of the cylinder housing by inserting the piston and socket
tool into the housing, and screwing it into the piston holder.
5.
Tighten the piston with moderate force. Use a screwdriver and place it into the holes
in the socket extension to do this.
6.
Remove the front SpeedBite plug protectors and the rear dust protection plug.
7.
Lubricate the end of the piston to ease installation through the main seal in the cylinder
barrel.
Содержание Ametek Quizix 5000 Series
