manualshive.com logo in svg

Champion ci 110, Руководство по эксплуатации и частям

Поделиться
Скачать
Champion ci 110 Скачать руководство пользователя страница 22

Champion Compressors Ltd. 

Manual No. 975203 Rev H 

 

16

 

8.2.2  Star-delta, CSU (Option Ci75, Standard Ci 110): 

 
The ‘Off-Auto’ switch, emergency stop button and hour meter are located on 
the lid of the machine. Unlike the Ci40 and 55 Dominators, the Ci 110 has 
constant speed unloading as standard.  The compressor runs off load rather 
than stopping when the upper pressure setting has been reached.  There is a 
run on timer fitted to ensure that during periods of low air usage, the 
compressor does not run unnecessarily.  The factory setting of this timer is six 
minutes, but it may be adjusted with specific installation requirements.  Please 
refer to 

Champion Compressors 

prior to any adjustments being made, as an 

incorrect setting may result in damage to the compressor. 
 
The compressor may start at any time whilst the compressor is in ‘Auto’ mode. 
Please note that if your machine is fitted with Auto Restart option, there may 
be a starting delay of up to 30 seconds after powering up the compressor. If 
the emergency stop button is used to stop the compressor or to cut power to 
the compressor, the Auto/Off switch must be toggled to restart the 
compressor. 
 

Warning :

 Do not remove covers or attempt any service without first ensuring 

the compressor is isolated from the mains power supply, as the compressor 
could start at any time. 

Содержание ci 110






































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды