manualshive.com logo in svg

Champion ci 110, Руководство по эксплуатации и частям

Поделиться
Скачать
Champion ci 110 Скачать руководство пользователя страница 10

Champion Compressors Ltd. 

Manual No. 975203 Rev H 

 

4

 

4.0 SAFETY 

 
 

4.1 

General Safety Notes 

 

Champion Compressors

 manufacture the Dominator Ci series so that they 

can be operated safely.  Persons operating the compressor are ultimately 
responsible for their own safety.  The following safety precautions are 
suggested as a guide to reduce the risk of injuries throughout the life of your 
compressor. 
 

• 

Do not operate the compressor in an unsafe condition.  Tag the 
compressor with an appropriate Warning Tag and render it inoperative by 
disconnecting the power at the source.  This will prevent others from being 
able to operate it until it is repaired. 

• 

Correct hearing protection must be worn by person(s) working on or around 
the compressor whilst the compressor is in operation. 

• 

Before removing the oil filler cap ensure the compressor is not running and 
is not pressurised.

 

 Shut down the compressor, isolate and bleed the 

compressor air receiver before attempting to remove the oil filler cap. Vent 
all internal pressure before opening any line, fitting, valve, drain plug, 
connection or other component.  If you are unsure how to do this contact 
your nearest Champion Service Agent. 

• 

Do not vary pressure switch setting from those listed in Section 8.3 without 
prior approval from 

Champion Compressors’

 Engineering Department.  

Failure to comply to this may void your warranty. 

• 

Do not tamper with or remove the integrated screw or air receiver safety 
valves. 

• 

Clean up spills of lubricant or other combustibles immediately.  Keep 
sparks and other ignition sources at a safe distance.  Do not allow smoking 
near the compressor. 

• 

Keep electrical wiring and connections clean, free from dust, oil and tightly 
clamped. 

• 

Do not operate compressor or optional dryer with any protective guards or 
panels removed.  This includes the Ci 75 & 110 cabinet, fan & belt guards 
or motor fan cowlings.  Keep loose clothing and parts of the body away 
from fans and other moving parts at all times. 

Содержание ci 110






































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды