15
Installation
To convert a 1-point connection machine to a 2-point connection machine.
1.
Open the control cabinet and remove the jumpers, (Fig. 12), between 'Dishwasher'
terminal block and the 'Booster' terminal block.
2.
Cover the existing 1-point connection data plate, (Fig. 13), with the 2-point connection
data plate, (Fig. 14), stowed in the plastic bag, (Fig. 15), next to the input terminal
block.
3.
Connect the incoming power according to the customer's requirements.
4.
Conversion is complete
Fig.14 - 2-point connection data plate
Fig.15 -
The 2-point data plate is located in a plastic bag next to the
terminal block.
