Champion 40240, Инструкция пользователя, Страница: 4 / 16

3
ASSEMBLY INSTRUCTIONS
FIG. 7
C
B
L-12
A
FIG. 4
L-10
F
L-11
FIG. 5
H
L-10
L-11
G
FIG. 6
L-11
L-10
L-11
L-10
ATTACH NUT
FROM THIS SIDE
FINGER TIGHTEN ONLY
ADDITIONAL TOOLS REQUIRED: One Standard Slotted (Flat Blade) Screwdriver.
STEP 1: (FIG. 2) Slide Red Vinyl Grip (L-13) onto Trigger. Insert Support Bracket (I) into Trap Body (A).
(FIG. 3) Install one Carriage Bolt (L-11) and one Flange Nut (L-10). Tighten securely with Wrench.
STEP 2: (FIG. 4) Attach Rear Leg (F) to Trap Body (A) using one Carriage Bolt (L-11) and one Flange Nut (L-10).
NOTE: Nut must be attached on right side as indicated in FIG. 4. Tighten securely with Wrench.
STEP 3: (FIGS. 5 & 6) Join Right and Left Front Legs (G & H) together with Carriage Bolt and Flange Nut.
Finger tighten only. Attach Legs to Trap Body (A) using 2 Carriage Bolts (L-11) and 2 Flange Nuts (L-10).
NOTE: Bolts and Nuts must be attached in exact position as FIG. 6 to allow use of Wrench. Securely tighten all
three nuts with wrench.
STEP 4: (Pre-Assembled) (FIG. 7) Attach Flight Rail (B) to Throwing Arm (C) using three (3) 4mm x 8mm
Screws (L-12). Tighten securely with a Standard (slotted) Screwdriver. NOTE: It is normal for these screws to
be somewhat difficult to turn.
FIG. 2
TRIGGER
L-13
I
A
FIG. 3
L-11
L-10
TRIGGER SPRING
NOT SHOWN
TRIGGER