Champion 100458, Руководство оператора

Страница: 21 / 32

100458 - 1200W PORTAbLE GENERATOR
SPECIfICATIONS
21
SPECIfICATIONS
Generator Specifications
Generator Model ........................................ 100458
Start Type ................................................ Manual
Watts (Starting/Running) ........................... 1500/1200
AC Volts ....................................................... 120
AC Amps @ 120 (Starting/Running) ..................... 12.5/10
Frequency .................................................. 60 Hz
Phase ....................................................... Single
Gross Weight ................................. 58.4 lb. (26.5 kg)
Net Weight ...................................... 54.9 lb. (24.9 kg)
Length ........................................... 19.3 in. (49 cm)
Width ........................................... 14 in. (35.5 cm)
Height ............................................ 16 in. (40.7 cm)
Engine Specifications
Model ............................................ YF152FD-4-010
Displacement ............................................... 80 cc
Type ................................................ 4-Stroke OHV
Oil Specifications
DO NOT OVERFILL.
Type ............................................ *See chart below
Capacity ........................................... 0.4 qt. (0.4 L)
-20 0 20 40 60
Ambient temperature / Temperatura ambiente / Température ambiante
Recommended Oil Type / Tipo de aceite recomendado / Type d’huile recommandé
80 100 120
-28.9
°F
°C
-17.8 -6.7 4.4 15.6 26.7 37.8 48.9
10W-30
5W-30 Synthetic / Sintético / Synthétique
10W-40 5W-30

NOTICE
Weather will affect engine oil and engine performance.
Change the type of engine oil used based on weather
conditions to suit the engine needs.
fuel Specifications
Use regular unleaded gasoline with a minimum octane rating of
85 and an ethanol content of less than 10% by volume. DO NOT
USE E15 or E85. DO NOT OVERFILL.
Gasoline Capacity ................................... 1.9 gal. (7 L)
Spark Plug Specifications
OEM Type ........................................... NHSP E6RTC
Replacement Type ................... NGK BPR6HS or equivalent
Gap ............................... 0.028-0.031 in. (0.7-0.8 mm)
Valve Specifications
Intake Clearance .............. 0.005-0.007 in. (0.13-0.17 mm)
Exhaust Clearance ............ 0.007-0.009 in. (0.18-0.22 mm)

NOTICE
A technical bulletin regarding valve adjustment procedures
is available at www.championpowerequipment.com.
Temperature Specifications
Starting Temperature Range (°F/°C) ........ 5 to 104/-15 to 40

NOTICE
An important message about temperature:
Your product
is designed and rated for continuous operation at ambient
temperatures up to 40°C (104°F). When your product is
needed it may be operated at temperatures ranging from
5°F (-15°C) to 122°F (50°C) for short periods of time. If
exposed to temperatures outside this range during storage,
it should be brought back within this range before operation.
In any event, the product must always be operated
outdoors, in a well-ventilated area and away from doors,
windows and vents.
IC Warning
This device complies with Industry Canada license - exempt RSS
standard(s).
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including
interference that may cause undesired operation of the
device.
VALVE CLEARANCE
ALL PORTABLE GENS/INVS.
INTAKE 0.006-0.008 (0.15-0.2 MM)
EXHAUST 0.007-0.009 (0.18-0.23 MM)
2000W INVERTERS ONLY
INTAKE AND EXHAUST 0.005-0.007 IN. (0.13-0.18 MM)