5.
Remove the clear or pink carburetor
drain hose from the drain hole in the
base of the enclosure and extend hose
to exterior and direct the hose into your
gasoline container. Turn main fuel valve
to the “ON” (“gasoline” position for Dual
Fuel) and with hose securely positioned
into your gasoline can loosen drain
screw only enough until you see gas
flowing. After fuel tank is completely
empty close drain screw, turn fuel valve
“OFF” and insert drain hose back into
the drain hole in the base of the
enclosure.
6.
On the top handle on both sides, with a
Phillips screwdriver, remove the 3
Phillips screws facing toward the gas
cap.
7.
Separate the handle along the center
seam and pull downwards toward the
top of the unit.
*Put all parts into a box and label it
“
Top/Handle Parts
”
