Champion Power Equipment 71321 Скачать руководство пользователя страница 4

1

  

REV 71321-20130513

ENGLISH

 

71321

Introduction

Congratulations on your purchase of a Champion Power 
Equipment pressure washer . CPE designs and builds 
pressure washers to strict specifications . With proper 
use and maintenance, this pressure washer will bring 
years of satisfying service .

Pressure Washer

This unit is a gasoline engine driven pressure washer . It is 
designed for use in cleaning with or without detergent and 
is suitable for decks, patios, house siding, vehicles, lawn 
furniture, barbecue grills, gardening tools and more .

Record the model and serial numbers as well as date and place of purchase for future reference . Have this 
information available when ordering parts and when making technical or warranty inquiries .

Accessories

Champion Power Equipment manufactures and sells 
accessories designed to help you get the most from 
your purchase . To find out more about our accessories, 
please visit our web site at:
    www.championpowerequipment.com

This booklet

Every effort has been made to ensure the accuracy and 
completeness of the information in this manual . We reserve 
the right to change, alter and/or improve the product and 
this document at any time without prior notice . 

Champion Power Equipment Support

Model Number

Serial Number

Date of Purchase

Purchase Location

1-877-338-0999

71321

For 

Oil Type see ‘Add Engine Oil‘ section . For Fuel Type see ‘Add Fuel‘ section .

INTRODUCTION

Содержание 71321


































Отзывы: