Champion Power Equipment 71321 Скачать руководство пользователя страница 30

27

  

REV 71321-20130513

ENGLISH

 

71321

WARRANTy

WARRANTy

CHAMPION POWER EQUIPMENT

1 YEAR LIMITED WARRANTY

Effective September 1, 2006 . Replaces all undated warranties 
and all warranties dated before September 1, 2006 .

Warranty Qualifications

Champion Power Equipment (CPE) will register this 
warranty upon receipt of your Warranty Registration Card 
and a copy of your sales receipt from one of CPE’s retail 
locations as proof of purchase .
Please submit your warranty registration and your proof 
of purchase within ten (10) days of the date of purchase .

Repair/Replacement Warranty

CPE warrants to the original purchaser that the 
mechanical and electrical components will be free of 
defects in material and workmanship for a period of one 
(1) year from the original date of purchase, and one (1) 
year for commercial & industrial use . Transportation 
charges on product submitted for repair or replacement 
under this warranty are the sole responsibility of the 
purchaser . This warranty only applies to the original 
purchaser and is not transferable .

Do Not Return The Unit To The Place Of Purchase

Contact CPE’s Technical Service and CPE will troubleshoot 
any issue via phone or e-mail . If the problem is not 
corrected by this method, CPE will, at its option, authorize 
evaluation, repair or replacement of the defective part or 
component at a CPE Service Center . CPE will provide you 
with a case number for warranty service . Please keep it 
for future reference . Repairs or replacements without prior 
authorization, or at an unauthorized repair facility, will not 
be covered by this warranty .

Warranty Exclusions

This warranty does not cover the following repairs and 
equipment:

Normal Wear

Pressure washers need periodic parts and service to 
perform well . This warranty does not cover repair when 
normal use has exhausted the life of a part or the 
equipment as a whole .

Installation, Use and Maintenance

This warranty will not apply to parts and/or labor if 
this pressure washer is deemed to have been misused, 
neglected, involved in an accident, abused, loaded 
beyond the pressure washer’s limits, modified, installed 
improperly or connected incorrectly to any water supply .

Installation, Use and Maintenance Cont’d. 

Normal maintenance such as spark plugs, air filters, 
adjustments, fuel system cleaning and obstruction due 
to buildup is not covered by this warranty .

Other Exclusions

This warranty excludes:

 

– Cosmetic defects such as paint, decals, etc .

 

– Wear items such as filter elements, o-rings, etc .

 

– Accessory parts such as starting batteries, and 

storage covers .

 

– Failures due to acts of God and other force majeure 

events beyond the manufacturer’s control .

 

– Problems cause by parts that are not original 

Champion Power Equipment parts .

limits of Implied Warranty and Consequential Damage

Champion Power Equipment disclaims any obligation to 
cover any loss of time, use of this product, freight, or 
any incidental or consequential claim by anyone from 
using this pressure washer . THIS WARRANTY IS IN 
LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WARRANTIES OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR 
PURPOSE . 
A unit provided as an exchange will be subject to the 
warranty of the original unit . The length of the warranty 
governing the exchanged unit will remain calculated by 
reference to the purchase date of the original unit .
This warranty gives you certain legal rights which may 
change from state to state . Your state may also have 
other rights you may be entitled to that are not listed 
within this warranty .

Contact Information

Address

Champion Power Equipment, Inc .
Customer Service
10006 Santa Fe Springs Rd .
Santa Fe Springs, CA 90670
www .championpowerequipment .com

Customer Service

Mon – Fri 8:30 AM – 5:00 PM (PST/PDT)
Toll Free: 1-877-338-0999
info@championpowerequipment .com
Fax no .: 1-562-236-9429

Technical Service

Mon – Fri 8:30 AM – 5:00 PM (PST/PDT)
Toll Free: 1-877-338-0999
tech@championpowerequipment .com
24/7 Tech Support: 1-562-204-1188

Содержание 71321


































Отзывы: