Champion Power Equipment 71307, Руководство пользователя и инструкции по эксплуатации

Страница: 14 / 31

Assembly
10 Rev 71307-20100513 E
Connect LPG cylinder
This engine is certified to operate on liquid
petroleum gas (LPG).
1. Turn off the fuel valve on the generator.
2. Attach the LPG connector to the gas
inlet.
3. Open the manual shutoff valve on the
LPG cylinder.
WARNING
Liquefied Petroleum Gas is extremely flammable
and explosive.
If there is a strong smell of gas:
Close off the gas supply at the cylinder.
Use soapy water which will produce a large
bubble at the point of any leak, to check the
cylinder valve, connections and the generator.
Do not smoke or light a cigarette.
Contact a qualified technician to inspect and
repair the LPG system.
CAUTION
Use approved LPG cylinders equipped with an
OPD (overfilling prevention device) valve.
Always keep the cylinder in a vertical position
with the valve on top and installed at ground
level on a flat surface
Cylinders must not be installed near any heat
source and should not be exposed to sun, rain,
dust and heat.
Regulators to be used on the cylinders must be
of the diameter as the cylinder valve.
Regulators should always be in the off position
when the cylinder is not in use.
Grounding
Your generator must be properly connected
to an appropriate ground to help prevent
electric shock.
WARNING
Failure to properly ground the generator can
result in electric shock.
A ground terminal connected to the frame of
the generator has been provided on the
power panel. For remote grounding, connect
of a length of heavy gauge (12 AWG
minimum) copper wire between the
generator ground terminal and a copper rod
driven into the ground. We strongly
recommend that you consult with a qualified
electrician to ensure compliance with local
electrical codes.