background image

1

  

REV 41351-20120712

ENGLISH

 

41351

Introduction

Congratulations on your purchase of a Champion 
Power Equipment generator . CPE designs and builds 
generators to strict specifications . With proper use and 
maintenance, this generator will bring years of satisfying 
service .

Portable Power Generator

This unit is a gasoline engine driven, alternating current 
(AC) generator . It is designed to supply electrical power 
for lighting, appliances, tools and similar equipment .

Record the model and serial numbers as well as date and place of purchase for future reference . Have this 
information available when ordering parts and when making technical or warranty inquiries .

Accessories

Champion Power Equipment manufactures and sells 
accessories designed to help you get the most from 
your purchase . To find out more about our covers, power 
cables and storm kits, please visit our web site at:
    www.championpowerequipment.com

This Booklet

Every effort has been made to ensure the accuracy and 
completeness of the information in this manual . We reserve 
the right to change, alter and/or improve the product and 
this document at any time without prior notice . 

Champion Power Equipment Support

Model Number

Serial Number

Date of Purchase

Purchase Location

1-877-338-0999

41351

For 

Oil Type see ‘Add Engine Oil‘ section . For Fuel Type see ‘Add Fuel‘ section .

INTROdUCTION

Содержание 41351































Отзывы: