REV 41351-20120712
6
41351
ENGLISH
Power Panel
(1) Ignition Switch – Press the switch to the “START”
position to start the generator, or to the “ON”
position to start the generator manually . Flip to the
“OFF” position to turn off the generator .
(2) 120V / 30A Twist-Lock – protected by a 30 Amp
circuit breaker . This receptacle powers 120 Volt
AC, 60 Hz, single phase loads .
(3) 120/240V / 30A Twist-Lock – protected by a 30
Amp double throw circuit breaker on each 120 Volt
leg of the receptacle . This receptacle powers 240
Volt AC, 60 Hz, single phase loads . If an L14- 30P
plug is wired for only one 120 Volt leg (3-wire
connection) then this receptacle powers 120 Volt
AC, 60 Hz, single phase loads .
(4) 120V / 20A Duplex – protected by a 20 Amp
circuit breaker . Use to operate 120 Volt AC, single
phase, 60 Hz loads .
(5) Ground Terminal – Consult an electrician for local
grounding regulations .
(6) Circuit Breakers – Protects the generator against
electrical overload .
(7) Intelligauge – Tri-mode digital display for running
hours, voltage and hertz .
CONTROLS ANd fEATURES
1
2
3
5
4
7
6
