100680 - 27 iN. 2-STAgE SNOwbLOwER
OPERATiON
22
Control Levers
Self-drive control handle. Located on
the right side handle (Fig. 18).
When the snowblower has been put
into gear, pushing this lever towards the
handle engages the wheels.
Releasing the self-drive control handle
causes the machine to stop moving.
Auger control handle. Located on the
left side handle (Fig. 18).
Pushing this lever towards the handle
causes the auger and impeller to
activate.
Releasing the auger control handle
causes the auger to stop moving.
auger control handle
Self-drive
control handle
Figure 18
Drive System
Your snowblower has 6 forward speeds and 2 reverse to regulate
forward and backward motion (Fig. 19).
Forward speeds range from slowest
position 1 to fastest position 6.
Reverse speeds range from slowest
position R1 to fastest position R2.
Faster
Slower
adjusting the self-propelled drive system:
1. Release the self-drive control handle to bring the snowblower
to a stop.
2. Move the speed-control lever to the gear (either forward or
reverse) that you require (Fig. 19).
R2
1
R1
6
Figure 19
3. Press the self-drive control handle to engage the drive
system.
wARNiNg
Watch out for rotating auger. Keep hands, feet, hair and loose
clothing away from any moving parts on the machine.
