background image

18

100246

 

ENGLISH

SPECIfICATIONS

Engine Specifications

 

– Model

YF168FD-2-010

 

– Displacement

196cc

 

– Type

4-Stroke OHV

 

– Start Type

Recoil

Oil

Use 10W-30 automotive oil.
Oil capacity is up to 0.6 L (0.6 qt.).  
DO NOT OVERFILL.
Please reference the following chart for recommended 
oil types for use in the generator.

fuel

Fuel capacity is 3.4 gallon (13 L). Use regular unleaded 
gasoline with a minimum octane rating of 85 and an 
ethanol content of less than 10% by volume.

Generator Specifications

 

– Model

100246

 

– Running Wattage

2800 Watts

 

– Starting Wattage

4000 Watts

 

– AC Load

120/240 V

 

– Phase

Single

 

– Frequency

60 Hz

 

– Fuel Capacity

3.4 gallon (13 L) 

 

– Gross Weight

110.2 lb. (50 kg)

 

– Net Weight

101.9 lb. (46.2 kg)

 

– Height

22.2 in. (56.5 cm)

 

– Width

23.9 in. (60.8 cm)

 

– Length

26.3 in. (66.7 cm)

Maintenance Valve Clearance

 

– Intake: 0.13 – 0.17 mm (0.005 – 0.007 in.)

 

– Exhaust: 0.18 – 0.22 mm (0.007 – 0.009 in.)
Note: Tech bulletin regarding the valve adjustment 
procedure is on www.championpowerequipment.com.

Spark Plugs

OEM spark plug: NHSP F6RTC
Replacement spark plug: NGK BPR6ES or equivalent
Make certain the spark plug gap is 0.7 - 0.8 mm or 
(0.028 - 0.031 in.).

An Important Message About Temperature

Your Champion Power Equipment product is designed 
and rated for continuous operation at ambient 
temperatures up to 40°C (104°F). When your product is 
needed your product may be operated at temperatures 
ranging from -15°C (5°F) to 50°C (122°F) for short 
periods. If the product is exposed to temperatures 
outside this range during storage, it should be brought 
back within this range before operation. In any event, 
the product must always be operated outdoors, in a  
well-ventilated area and away from doors, windows and 
other vents.

Weather will affect engine oil and engine 
performance. Change the type of engine oil used 
based on weather conditions to suit the engine 
needs.

NOTE

Full Synthetic 5W-30

Degrees Celsiusº (Outside)

(Outside)

Degrees Fahrenheitº

Содержание 100246
































Отзывы: