Champion Global Power Equipment 201185, Руководство оператора

Страница: 15 / 42

201185 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER
CONTROLS AND FEATURES
15
Wireless Remote Control
This generator is equipped with a wireless remote control system
for starting and stopping. The system consists of (4) main
components:
1. Receiver Control Module (RCM)
2. Remote Control
3. Start/Stop button
4. Auto-Choke
The Remote Control functions are enabled when:
1. The START/STOP button is in “STANDBY” mode and flashes
green once per second.
2. The fuel dial is in the gasoline on position.
The Remote Control functions are disabled when the above
condition is not met.
To start the generator wirelessly, press the “START”
a
button
on the Remote Control one time to start the engine. The engine
will attempt to start (6) times. The RCM controls the Auto-
Choke during each attempt to start. If the generator does not
start, call Champion Customer Care team for assistance at
1-877-338-0999.
To stop the generator wirelessly, press the “STOP” $ button on
the Remote Control one time.
Remote Control Power Consumption
While the START/STOP button is in “STANDBY” mode and flashing
green once per second, the RCM is active and waiting for a remote
signal. This standby function requires a small amount of electrical
current from the battery and will shut off automatically after 24
hours.
Pushing and holding the “STOP” $ button on the remote control
for 5 seconds or pushing and holding the START/STOP button
on the control panel for 5 seconds disables the standby function
manually and the RCM will no longer consume any battery power
or wait for remote signal. This is indicated by the START/STOP
button no longer flashing.
Parts Included
Accessories
Dual Port USB Adapter (5v/2.4A) .................................. 1
Remote Key Fob .................................................... 1
Engine Oil ...................................... 20.3 fl. oz. (600 ml)
Oil Funnel ........................................................... 1
Assembly Parts
Wheels
8 in. (20.3 cm) Never Flat Wheel (A)
........................... 2
Wheel hub caps (B) ............................................. 2
Roll Pin (C) ...................................................... 2
R-clip (D) ........................................................ 2
Engine Vibration Mounts
Support Leg with Vibration Mounts (E)
........................ 1
Flange Lock Nut (M8) (F) ....................................... 2
Folding Handle
Handle (G)
....................................................... 1
Short Pin (H) .................................................... 1
R-clip (I) ......................................................... 1
A
E
G
H I
F
b C D
Tools Needed
– Wrench/Socket set (metric)