100402 - 2000W DUAL FUEL INVERTER GENERATOR
SPECIFICATIONS
28
SPECIFICATIONS
Generator Specifications
Generator Model
........................................
100402
Start Type
................................................
Manual
Watts (Starting/Running)
...........................
2000/1600
Watts (LPG) (Starting/Running)
......................
1800/1440
AC Volts
.......................................................
120
AC Amps @ 120V
............................................
13.3
DC Volts
........................................................
12
DC Amps
.........................................................
8
Frequency
..................................................
60 Hz
Phase
.......................................................
Single
Net Weight
......................................
48.7 lb. (22.1 kg)
Length
...........................................
20.5 in. (52 cm)
Width
.........................................
12.8 in. (32.5 cm)
Height
............................................
16.9 in. (43 cm)
Engine Specifications
Model
..............................................
YF149FD-L_G
Displacement
...............................................
80 cc
Type
................................................
4-Stroke OHV
Oil Specifications
DO NOT OVERFILL.
Type
............................................
*See chart below
Capacity
......................................
13.5 fl. oz. (0.4 qt)
-20
0
20
40
60
Ambient temperature
Recommended Engine Oil Type
80
100
120
-28.9
°F
°C
-17.8
-6.7
4.4
15.6
26.7
37.8
48.9
10W-30
5W-30 Full Synthetic
10W-40
5W-30
NOTICE
Temperature will affect engine oil and engine performance.
Change the type of engine oil used based on temperature
shown in the
“Recommended Engine Oil Type”
table.
Fuel Specifications
Use regular unleaded gasoline with a minimum octane rating of
87 and an ethanol content of 10% or less by volume. DO NOT
USE E15 or E85. DO NOT OVERFILL.
Gasoline Capacity
...............................
1.1 gal. (4.20 L)
Spark Plug Specifications
OEM Type
..................................................
E7RTC
Replacement Type
...................
NGK BPR7HS or equivalent
Gap
...............................
0.024-0.028 in. (0.6-0.7 mm)
Valve Specifications
Intake Clearance
.............................
0.004 in. (0.1 mm)
Exhaust Clearance
...........................
0.004 in. (0.1 mm)
NOTICE
A technical bulletin regarding valve adjustment procedures
is available at www.championpowerequipment.com.
Temperature Specifications
Starting Temperature Range (°F/°C)
........
5 to 104/-15 to 40
NOTICE
An important message about temperature:
Your product
is designed and rated for continuous operation at ambient
temperatures up to 40°C (104°F). When your product is
needed it may be operated at temperatures ranging from
5°F (-15°C) to 122°F (50°C) for short periods of time. If
exposed to temperatures outside this range during storage,
it should be brought back within this range before operation.
In any event, the product must always be operated
outdoors, in a well-ventilated area and away from doors,
windows and vents.
VALVE CLEARANCE
ALL PORTABLE GENS/INVS.
INTAKE 0.006-0.008 (0.15-0.2 MM)
EXHAUST 0.007-0.009 (0.18-0.23 MM)
2000W INVERTERS ONLY
INTAKE AND EXHAUST 0.005-0.007 IN. (0.13-0.18 MM)
