5
201101-01
Decorative Screw
Fixture Top
TESTING AND ADJUSTMENTS
1. Turn on the circuit breaker and light
switch.
Note:
Sensor has a 1
1
/
2
minute warm up period
before it will detect motion. When first turned
on wait 1
1
/
2
minutes.
2. Set:
• ON-TIME switch to TEST
• SENSITIVITY to Mid (M) position
3. Walk through the coverage area noting where
you are when the lights turn on. In TEST mode,
light will stay on for 5 seconds after motion has
stopped and then turn off.
4. If the fixture is equipped with a rotatable sensor
(see Figure 7), move the sensor head left or
right to change the coverage area (see Figure
8).
Note:
Grasp the sensor only as shown and
turn the entire sensor.
Any other method
may damage the sensor. Do not force it
past the stops.
Figure 5
Figure 6
Figure 7
TEST 1 5 10 MIN
ON-TIME
LO - M - HI
SENSITIVITY