manualshive.com logo in svg

Chamberlain LiftMaster Professional SW420, Руководство по установке

Chamberlain LiftMaster Professional SW420 - продукт высокого качества для автоматизации ворот. Установочное руководство доступно для загрузки бесплатно на manualshive.com. Обеспечьте безопасность и удобство с Chamberlain LiftMaster Professional SW420. (Translated back to English: Chamberlain LiftMaster Professional SW420 - a high-quality product for gate automation. The installation manual is available for free download on manualshive.com. Ensure safety and convenience with Chamberlain LiftMaster Professional SW420.)

Поделиться
Скачать
background image

2

OPERATOR SPECIFICATIONS

Carton Inventory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Operator Dimensions and Specifications  . . . . . . . . . . . . . . . . . . . 3
UL325 Model Classifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

OPERATOR WARNINGS

Suggested Safety Protection Device Locations. . . . . . . . . . . . . . . 5
Safety Installation Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Gate Construction Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Safety Precautions for Swing and 
Ornamental “Grill Type Gates”  . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Warning Sign Placement  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

INSTALLATION

Post Mounting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Pad Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Pedestal Mounting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Control Arm Assembly  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Mechanical Disconnect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

WIRING

Power Wiring Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
On/Off Switch Power Wiring. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Stop/Reset Button Control Wiring (Required)  . . . . . . . . . . . . . . 15

ADJUSTMENT

Programming the Radio Receiver . . . . . . . . . . . . . . . . . . . . . . . . 16
Limit Switch Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
RPM Sensor (Hall Effect) Adjustment. . . . . . . . . . . . . . . . . . . . . 18
Sequenced Access Management System (SAMS)  . . . . . . . . . . . 19
Accessory Wiring  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-21
Control Board Illustration  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Controller Programming and Features  . . . . . . . . . . . . . . . . . 23-24
Program Settings  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-26

TROUBLESHOOTING

  . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-28

MAINTENANCE

Operator Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Single Phase Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Repair Parts  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Illustrated Parts  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Safety Accessories for Secondary Entrapment Protection  . . . . . 33
Control Connection Diagrams. . . . . . . . . . . . . . . . . . . . . . . . . . . 34

OPERATOR NOTES

  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

WARRANTY POLICY

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

T A B L E   O F   C O N T E N T S

IMPORTANT NOTE

•  BEFORE attempting to install, operate or maintain the operator, 

you MUST read and fully understand this manual and follow all 
safety instructions.

•  These instructions are intended to highlight certain safety 

related issues. These instructions are not intended to be 
comprehensive. Because each application is unique, it is the 
responsibility of the purchaser, designer, installer and end user 
to ensure that the total gate system is safe for its intended use.

CARTON INVENTORY

Before beginning your installation check that all components 
were supplied and received undamaged. Refer to list below 
for factory supplied parts.

PART NO. 

DESCRIPTION 

QTY.

01-G0582 Safety 

Gate 

Brochure 

1

02-401-SP Stop 

Button 

1

07-2705 Arm 

Stop 

1

10-2111 Gate 

Bracket 

1

11-2754 U-Bolt 

Nut 

Tool 

1

12-2727 Bushing 

3/8" 

3

40-3505 Warning 

Sign 

2

80-10026 Washer, 

Shim 

3/8" 

2

80-206-65 Spacer 

4

80-2754 U-Bolt 

Nut 

2

82-HN38-16 Bolt 

3/8-16 

x 

1" 

1

82-HN38-18 

Hex Head Bolt 3/8-16 

2

82-SH37-10 

Socket Head Bolt 3/8-24 

1

85-FW-38S Flat 

Washer 

3/8" 

1

HARDWARE KIT 
SW420 (K77-SW420)

ATTENTION

AVERTISSEMENT

AVERTISSEMENT

AVERTISSEMENT

WARNING

WARNING

CAUTION

WARNING

WARNING

PRECAUCIÓN

ADVERTENCIA

ADVERTENCIA

ADVERTENCIA

ATTENTION

AVERTISSEMENT

AVERTISSEMENT

AVERTISSEMENT

WARNING

CAUTION

WARNING

WARNING

WARNING

PRECAUCIÓN

ADVERTENCIA

ADVERTENCIA

ADVERTENCIA

ATTENTION

AVERTISSEMENT

AVERTISSEMENT

AVERTISSEMENT

WARNING

CAUTION

CAUTION

WARNING

WARNING

PRECAUCIÓN

ADVERTENCIA

ADVERTENCIA

ADVERTENCIA

Mechanical

Electrical

When you see these Safety Symbols and Signal Words on the 
following pages, they will alert you to the possibility of 

serious 

injury or death

 if you do not comply with the warnings that 

accompany them. The hazard may come from something 
mechanical or from electric shock. Read the warnings carefully.

When you see this Signal Word on the following pages, it will alert 
you to the possibility of damage to your gate and/or the gate 
operator if you do not comply with the cautionary statements that 
accompany it. Read them carefully.

Содержание LiftMaster Professional SW420





































Отзывы:

Нет отзывов

Похожие инструкции для LiftMaster Professional SW420

C.C.E. RADIO MOBILE TX EVO Assembly Instructions preview
RADIO MOBILE TX EVO
Бренд: C.C.E. Страницы: 2
Chamberlain LiftMaster PROFESSIONAL LYN300 Series Instructions Manual preview
LiftMaster PROFESSIONAL LYN300 Series
Бренд: Chamberlain Страницы: 99
Nice MhouseKit WG2W Instructions And Warnings For Installation And Use preview
MhouseKit WG2W
Бренд: Nice Страницы: 148
Max Keystone Series Install Manual preview
Keystone Series
Бренд: Max Страницы: 4
CAME RIOED8WS Manual preview
RIOED8WS
Бренд: CAME Страницы: 20
CAME BX704AGS Installation Manual preview
BX704AGS
Бренд: CAME Страницы: 128
Automatic Technology GDO-9 ENDURO GEN2 Homeowner'S Manual preview
GDO-9 ENDURO GEN2
Бренд: Automatic Technology Страницы: 20
Chamberlain ATS Owner'S Manual preview
ATS
Бренд: Chamberlain Страницы: 72
Dea 224RR Operating Instructions And Warnings preview
224RR
Бренд: Dea Страницы: 68
Home Master GDR02 Operator'S Manual preview
GDR02
Бренд: Home Master Страницы: 47
Zareba G752 Installation Manual preview
G752
Бренд: Zareba Страницы: 35
Daspi SKY C Instruction Manual preview
SKY C
Бренд: Daspi Страницы: 24
tau CFR18 Manual preview
CFR18
Бренд: tau Страницы: 4
Chamberlain 3280 1/2 HP Owner'S Manual preview
3280 1/2 HP
Бренд: Chamberlain Страницы: 36
FAAC 400 CBAC lungo User Manual preview
400 CBAC lungo
Бренд: FAAC Страницы: 9
Nice MC824H/V1 Original Instructions preview
MC824H/V1
Бренд: Nice Страницы: 2
Vimar Elvox RA96 Installation And Operation Manual preview
Elvox RA96
Бренд: Vimar Страницы: 8
moore o matic Z133 Series Installation And Operation Manual preview
Z133 Series
Бренд: moore o matic Страницы: 7

Бренды по названию

Популярные бренды

Загрузить еще бренды