2
Table of Contents
INTRODUCTION 2-5
Safety Symbol and Signal Word Review .. 2
Planning ................................................... 3
Preparing Your Garage Door .................... 4
Tools Needed ........................................... 4
Specifications ........................................... 4
Carton Inventory ...................................... 5
Hardware Inventory .................................. 5
ASSEMBLY 6-7
Attach the Collar to the
Garage Door Opener ................................ 6
Attach Mounting Bracket to the
Garage Door Opener ................................ 7
INSTALLATION 7-17
Installation Safety Instructions ................. 7
Position and Mount the Garage Door
Opener ..................................................... 8
Attach the Emergency Release Rope
and Handle ............................................... 9
Install Power Door Lock ........................... 9
Attach the Cable Tension Monitor
(Required) .............................................. 10
Install the Smart Control Panel
®
............ 11
Install Remote Light ............................... 12
Electrical Requirements ......................... 13
Install the EverCharge
®
Standby Power System (optional) .......... 14
Install The Protector System
®
...........15-18
ADJUSTMENT 19-22
Program the Travel Limits ...................... 19
Set the Force .......................................... 20
Test the Safety Reversal System ............ 21
Test The Protector System
®
................... 21
Test Cable Tension Monitor ................... 22
Test Power Door Lock ............................ 22
To Open Door Manually ......................... 22
OPERATION 23-29
Operation Safety Instructions ................. 23
Using Your Garage Door Opener ............ 23
Using the Smart Control Panel
®
............. 24
Using the Remote Control ...................... 25
Care of Your Garage Door Opener .......... 26
Troubleshooting ................................26-27
Smart Control Panel
®
Messages ............ 28
Diagnostic Chart .................................... 29
PROGRAMMING 30-32
To Add or Reprogram a Hand-Held
Remote Control (Model 895MAX) .......... 30
To Erase All Codes From Garage Door
Opener Memory ..................................... 30
To Add, Reprogram or Change a
Keyless Entry PIN ................................... 31
Programming Light or Additional Light .. 32
REPAIR PARTS
33-34
Installation Parts .................................... 33
Garage Door Opener Assembly Parts ..... 34
ACCESSORIES 35
REPAIR PARTS AND SERVICE
36
WARRANTY 36
Introduction
When you see these Safety Symbols and Signal Words on the following pages, they
will alert you to the possibility of
serious injury or death
if you do not comply with the
warnings that accompany them. The hazard may come from something mechanical or
from electric shock. Read the warnings carefully.
When you see this Signal Word on the following pages, it will alert you to the possibility
of damage to your garage door and/or the garage door opener if you do not comply with
the cautionary statements that accompany it. Read them carefully.
Mechanical
Electrical
Safety Symbol and Signal Word Review
This garage door opener has been designed and tested to offer safe service provided it is installed, operated, maintained and tested in
strict accordance with the instructions and warnings contained in this manual.
