Chamberlain HandyLift Deluxe CR650EVO, Инструкция по установке и эксплуатации

Страница: 4 / 20

1. Instruction manual (this document)
2. Stop collar
3. Clamp bracket
4. Release handle, cord and risk of entrapment card
5. Hand Held Remotes (2)
6. Car Visor Remote
7. Hardware bag
8. Weight bar
9. Clamp plate
10. Warning label and risk of entrapment label
11. Opener
CARTON INVENTORY
1
11
TOOLS REQUIRED 2
1. Ladder
2. Adjustable wrench for U-bolts already installed
on the door
3. 8 mm socket, 10 mm socket and 13 mm extended
socket and socket wrench
4. 300 mm socket extension (for minimum side-room
installations)
5. Drill and 5.5 mm drill bit
6. Philips-head screwdriver
7. Rope (not shown)
8. Door stand or similar device to safely support door
(not shown)
DOOR REQUIREMENTS
3
Ensure that there is at least 45 mm from the edge of the curtain to the edge of the bracket. If the roller door
drum is on the edge of the curtain or is a smaller diameter, additional clearance may be required.
If the drum is more than 60 mm from the curtain edge or of a smaller diameter, an extension pole kit
may be required (section 10).
Different drum and bracket types may result in the minimum side room clearance not being possible and
extension poles being required. Ensure there is a power point near the opener.
95 mm
95 mm
Minimum distance from
edge of curtain to edge of
door bracket 45 mm
Independent
clamping method
Direct clamping
method
The maximum allowable door height is 4.5 m. With a maximum curtain area of 16 m²* (door height in metres
multiplied by the width in metres). The door must be spring balanced.
*
The Protector System™ (IR Beams) must be installed if the force at the edge of the closing door exceeds
400 N (40 kgf). Door axle diameter must not exceed 35 mm.
2