Chamberlain HandyLift Deluxe CR650EVO, Инструкция по установке и эксплуатации

Страница: 12 / 20

10
WIRELESS PROGRAMING (OPTIONAL ACCESSORIES)
NOTE: Transmitter(s) supplied with your opener are factory programmed.
Activate the opener only when the door is in full view, free of obstruction and properly adjusted.
No one should enter or leave garage whilst the door is in motion. Do not allow children to operate
push button(s) or transmitter(s). Do not allow children to play near the door.
Fix any wall control at a height of at least 1.5 m and within sight of the door but away from any
moving parts.
Press LEARN
LED will FLASH
TO ADD Transmitters
Press and hold down the desired
Button.
Press LEARN for 9 seconds
TO DELETE ALL REMOTES
LED on WILL TURN ON
After 9 seconds all remotes
are deleted and LED will go
out.
Release LRN button when
Courtesy LEDs
flashes once
OR
ADDING transmitters using the LRN “LEARN”
button
• Press and hold down the transmitter button you wish
to program to the opener.
• The orange LED on the opener will flash to indicate
it is receiving signal from the transmitter.
• Press and release the “LRN” button.
• The courtesy LEDs will flash once.
• Ensure the door is clear of obstruction, then test the
transmitter.
Deleting ALL transmitter codes
NOTE: This deletes all transmitters and codes
• Press and hold the LRN learn button until the orange
indicator light goes out (approximately 9 sec).
17