8
1
Remove Knockouts
To prevent damage to the controller from moisture or water:
• DO NOT install during rain. Internal components MUST be
kept free from of water and moisture.
• BEFORE opening the front cover of the controller, remove
ANY accumulated water from the top of the controller.
To prevent damage to ANY internal components:
• DO NOT attempt to remove the knockouts with a hammer.
Banging on the knockouts may result in shock to the circuit
boards, which could cause permanent damage.
1. Turn the key clockwise and open the controller.
2. Identify which knockouts need to be removed
based on your application.
3. Use a center punch tool to remove the knockouts.
NOTE:
Be careful when removing the knockouts to
avoid damaging the controller components.
PRE-INSTALL
NETWORK
PROGRAMMING
INSTALL
ACCESS CONTROL
INTRODUCTION
E
= Electrical Wiring
P
= Pedestal Mount
S
= Surface Mount
R
= Radio Antenna
W
= Wi-Fi
®
Antenna
R
R
W
S
S
S
S
P
P
P
P
E
W