ENGINE - B3
79019435B
FIG. 4
I-3180
4
3
2
FIG. 5
I-3242
5
FIG. 6
I-3311
6
FIG. 4: To add oil, open the door, 2, on the top of the
engine hood and remove the filler cap, 3. Add oil using a
funnel, 4, to prevent oil from spilling.
NOTE: Add oil slowly to assist in venting air from
crankcase.
FIG. 5: To Change Engine Oil — Operate Tractor until
oil is adequately warmed. Remove drain plug, 5, from
engine and allow all oil to drain.
Reinstall drain plug and fill engine crankcase to upper
limit on dipstick.
FIG. 6: To Replace Engine Oil Filter — Unscrew
element, 6, from engine and discard. Make sure original
filter gasket has been removed. Lubricate new gasket on
replacement element with clean engine oil. Screw on new
element until gasket contacts adapter and then tighten
element 2/3 turn more. Clean spilled oil and refill
crankcase. Start engine, check for leaks and replenish
oil level as required.