B2 - ENGINE
79019435B
ENGINE OIL AND FILTER
Engine oil and filter should be changed after first 50 hours
of operation and then every 150 hours thereafter.
FIG. 3: To Check Engine Oil Level — Tractor must be
parked on level ground with engine off. Pull out dipstick,
1, and check that oil level is between upper limit, F, and
lower limit, L, on dipstick. Wipe off dipstick, momentarily
reinstall in engine and check oil level again.
CAUTION: Exhaust system is extremely hot
after operation. Take care not to touch it to
avoid burns. Wear gloves when checking for
engine oil level in hot engine.
SERVICE ACCESS
CAUTION: Shut off engine before servicing
Tractor. Hood side panels and front grille must
be installed and secured prior to operating
unit.
FIG. 1: To access radiator, batter y and engine
components, right and left hood side panels can be easily
removed.
To remove; turn locking knobs, 1, to unlock. Pull outward
on bottom edge, and then lift side panel upward to
disengage and remove.
Reinstall in reverse order making sure top edge of side
panel engages correctly. Push inward on bottom edge and
turn knobs, 1, to lock.
FIG. 2: To permit battery removal, front grille must be
removed.
To remove; turn locks, 2, one-quarter turn counter-
clockwise. Tip top of grille outward and disconnect headlight
wiring couplers, 3. Lift grille upward to disengage lower
hooks and remove from Tractor.
Reinstall in reverse order making sure lower hooks engage
on pins. It will be necessary to push inward on locks, 2,
and then turn one-quarter turn clockwise to secure.
1
3
1
2
1
FIG. 3
I-3179
FIG. 1
I-3225
FIG. 2
I-3178