Challenge Spartan 185 SA, Руководство оператора

Страница: 9 / 22

5.0 Installation & Setup
9
5.0 Installation & Setup
5.1 Inspecting Shipment
This machine has been carefully packed to prevent damage during shipment. However, claims for
damage or loss are the responsibility of the recipient. Inspect all shipments as soon as they are
received. If there is any noticeable damage, note it on the freight bill. Visual and/or hidden damage
must be reported to the claims department of the carrier within 15 days. Contact your dealer if you
need any assistance. Check the contents of the box against the packing list on page 7. Make sure
there are no missing items.
5.2 Uncrating
The Spartan 185 SA weighs approximately 600 lbs (272 kg). DO NOT risk personal injury or damage
by attempting to move machinery with makeshift equipment or inadequate help. This machine is
shipped on a wooden skid and enclosed in a protective, wooden frame and corrugated carton.
Remove the carton by removing the nails or staples holding it to the wooden frame and lift it straight
up over the cutter.
Figure 2
Remove all tape and plastic wrapping. Remove the (4) lag screws from the base of the machine and
(4) lag screws from the support blocks. Insert lifting handles. While lifting one side of the machine at
a time, remove the support blocks and set aside. Unscrew ramp from skid, and position as shown in
Figure 3. Secure ramp to skid using (2) nails where indicated by red circles on ramp.
Figure 3